quick Overview
RubberTech™ Liquid Rubber Paint™ (LRP™) is expertly formulated with highly durable and flexible, pure acrylic that has a high scrub resistance and manufactured using only the best quality additives and pigments.
Accredited as a hyper premium waterproofing solution and designed to, with correct application, exceed its warranty as a long-life waterproofing sealant. With easy application and a seamless finish, RubberTech™ Liquid Rubber Paint™ is a reliable solution for waterproofing projects, delivering long-lasting protection against water, UV rays, and environmental wear.
Application Area
- Interior and exterior.
- Cement/clay tiles (new or weathered)
- Fiber cement sheeting (new or weathered)
- Previously painted substrates
- Primed metal and wooden substrates.
- Seal nail heads and roofing bolts.
- Best uses for Roof Coatings: Ideal for sealing tile, shingles, slate, sloped roofs, including metal and fibrous cement substrates.
- Stir well before use.
- With brush, roller or spray apply a generous/thick coat of RubberTech™ LRP™ to the area that needs protecting in small manageable sections.
- Firmly and evenly press a layer of woven fabric waterproofing membrane such as
- Biddim into the wet layer of RubberTech™ LRP™
- In ideal weather, allow to dry 4-6 hours before recoating.
- Apply a second, third and possibly a fourth generous coat, waiting 4-6 hours between coats, until the membrane is totally saturated and the surface has an even and very noticeable high sheen.
- This Product is ready for use un-thinned; thinning with water will reduce its hiding power and effectiveness.
- Three to four coats of this Product are used for best results.
- Application equipment clean-up is with clean tap water.
- Do not apply before 09:00 and after 16:00 in the winter.
- Do not apply exterior if it looks like rain will occur within 4-6 hours of application.
1-3 SQM per 1 liter
Although the spreading rate will vary with porosity and type of substrate, for uncoated new surfaces work on 0.5-1 square meters per liter for the first coat and 2-3 square meters per liter for subsequent coats and for when applied to sealed, previously painted substrates.
2-3 Coats
Touch dry: ± 1 hour
Hard dry: ± 4-6 hours